Health Homebrew

[moses]

What kind of setup are you running Moses?
Have you looked at buying them online? Have found them to be quite a bit cheaper (ebay has a decent selection of your standard hops).

I've made a fairly novice all grain 2 vessel setup set up, consisting of:

• 50 litre stockpot, with standard ball valve (similar to this http://thumbs2.picclick.com/d/l400/...oiling-Pan-35-litre-Stainless-Steel-thick.jpg ), which I use to boil the initial mash water and to boil the wort;
• converted 50 litre esky to mash, with a mesh filter ( similar to this http://www.homebrewing.org/assets/i...creen_with_1-2_inch_npt_fitting_angle_one.jpg ).
• Also made a wort chiller out of copper coil, which works nicely.

I actually use my gas stove with the stock pot, rather than a separate burner, and it does the job nicely.

What set up are you running?

 

[craigos]

I've made a fairly novice all grain 2 vessel setup set up, consisting of:

• 50 litre stockpot, with standard ball valve (similar to this http://thumbs2.picclick.com/d/l400/...oiling-Pan-35-litre-Stainless-Steel-thick.jpg ), which I use to boil the initial mash water and to boil the wort;
• converted 50 litre esky to mash, with a mesh filter ( similar to this http://www.homebrewing.org/assets/i...creen_with_1-2_inch_npt_fitting_angle_one.jpg ).
• Also made a wort chiller out of copper coil, which works nicely.

I actually use my gas stove with the stock pot, rather than a separate burner, and it does the job nicely.

What set up are you running?

I use the Grainfather, couldn't be happier with it. Was too much of a pussy to attempt to build my own setup.

So what process does the esky actually do?