Resource www.footyjumpers.com

Remove this Banner Ad

Melbourne-Sponsors.gif

251652.jpg

The outline for the star in the Reach logo in your sponsors list needs to be the same colour as the start itself (that reddish orange colour, not black)

Bigger sort of outline too on the entire thing
 

Log in to remove this ad.

Melbourne-Sponsors.gif

251652.jpg

The outline for the star in the Reach logo in your sponsors list needs to be the same colour as the start itself (that reddish orange colour, not black)
I'd give you a wider White outline, but the logo looks like this
uploadrlptshth.jpg
 
Mero just noticed this picture in the Buy/Swap/Sell thread and saw that the back of this Hawks 2016 Indigenous jumper has grey pattern-work throughout. It's existing elements from the front so nothing new to draw thankfully!

img_0289-jpg.616907


Hawthorn-Indig-2016.gif
 

(Log in to remove this ad.)

I had noticed this in the images I have of it.
I considered a watermark, and left it off.
Is it part of the design?

I would agree it it was a watermark if it was replicated on the front of the design too, but seeing it’s consigned to the back (probably as not to interfere with the numbers / sponsor), I consider it a part of the design
 
Mero, With the back Sponsors for Melbourne, 2014 BCNA Jumper had a pink block ahg logo
 

Attachments

  • IMG_4001.JPG
    IMG_4001.JPG
    161.8 KB · Views: 144

Going by the logo on the jacket, I'd say the thin part of the 'A' and the line through the middle needs to be completely black.

Screen Shot 2019-02-11 at 11.30.42 am.png

Same goes for the bottom of the 'L'

Screen Shot 2019-02-11 at 11.32.05 am.png

along with the lines that come off the 'E'

Screen Shot 2019-02-11 at 11.32.11 am.png

and also the top of the 'T'

Screen Shot 2019-02-11 at 11.32.16 am.png
 

Remove this Banner Ad

Back
Top